352392-PLNN

Jump to: | |

A penis model of a male who is lying down
scrotum-temperature-change penis-temperature-change compound-model comment

This model shows the size and shape change of the scrotum and the penis in different temperatures, the left side of this model being cold and the right side being warm. For this compound scan, the human model was first submerged in cold water for 10 minutes to create the left half of the 3D model, then the human model was submerged in hot water for 10 minutes to create the right half of the model. An ice pack (frozen eierspätzle to be exact) and blow dryers were used to keep the temperature as stable as possible for the duration of the scans. The alignment of the penis and the scrotum was slightly off for the second (warm) scan, which makes the penis look thicker then it actually was.

3D model information
body partpenis
poselying
arangement typenatural
excitednot excited
created2020-09
released2020-09-19
human model information
id352392
genderman
sexmale
body typeoverweight
given birthno
tags scrotum-temperature-change penis-temperature-change compound-model

Download model or surface

For informaton on how to 3D print or order 3D prints of these models, please read our model printing guidelines. To download a model or a surface, select a file below:

STL file format, ready for 3D printing 352392-PLNN-1-solid.stl 1 MB download size
STL file format, suited for 3D modeling 352392-PLNN-1-surface.stl 1 MB download size

If you use our models in a derivative artwork or print them using materials other than plastic, we'd love for you to mail us a picture. Or perhaps even send us a unique print? We'd love to collect our models printed using materials other than plastic!

Order a 3D print of this model

If you don't have access to a 3D printer or know anyone who does, you can also have these models custom printed and mailed to you. If you'd like to order a print, press the button below to open a new tab to start the order.

Unless you are experienced with 3d printing, we recommend that you read our tips on how to order a print. The cost for simple penis or vulva prints (10cm, PLA) will likely €20-€30 ($25-$35), which isn't bad if you don't have access to a printer. Other models, sizes and materials will increase the cost quite a bit.

Note: We are not affiliated with CraftCloud and we do not earn any money referrring you to them. We just think their prices and their web site are a good match for our users. (And their team was helpful!)

Tips for ordering a print
Avoid the rookie mistakes

  1. Select a size for your model: The price of the print is directly related to the cost the print. Simple vulva and penis models with the longest axis being about 10cm long make for a nice model to hold and examine. Be careful with the size -- scaling models up get expensive fast.
  2. Select PLA as the material: PLA is perfect for these models and the cheapest option. Of course you can choose any other material you like -- even gold is an option.
  3. Select the default 20% infill: The infill determines how much material is inside an otherwise hollow print; 20% is more than enough to make a strong print.
  4. Select a color of your choice and then finish the process to purchase your print.

If you would like to share a link to this model, we encourage you to save this model image to your computer/device and then go to the site where you wish to post the link and upload the image from your device.

On a mobile device, long press on the image and then select the option to save the image. On a computer, right click on the and select to save the image to your computer.

The link to this page:

The link to this screenshot:

more models from the same person and more penis models