591522-FSAN-4

Jump to: | |

A full body model of a female who is standing
pregnancy pregnancy-week-40

( this model has no comment )

3D model information
body partfull body
posestanding
arangement typearranged
excitednot excited
created2020-04
released2020-09-19
human model information
id591522
genderwoman
sexfemale
body typeaverage
given birthno
body history pregnancy
tags pregnancy-week-40

Download model or surface

For informaton on how to 3D print or order 3D prints of these models, please read our model printing guidelines. To download a model or a surface, select a file below:

STL file format, ready for 3D printing 591522-FSAN-4-solid.stl 6 MB download size
STL file format, suited for 3D modeling 591522-FSAN-4-surface.stl 6 MB download size

Order a 3D print of this model

If you don't have access to a 3D printer or know anyone who does, you can also have these models custom printed and mailed to you. If you'd like to order a print, press the button below to open a new tab to start the order.

Unless you are experienced with 3d printing, we recommend that you read our tips on how to order a print. The cost for simple penis or vulva prints (10cm, PLA) will likely €20-€30 ($25-$35), which isn't bad if you don't have access to a printer. Other models, sizes and materials will increase the cost quite a bit.

Note: We are not affiliated with CraftCloud and we do not earn any money referrring you to them. We just think their prices and their web site are a good match for our users. (And their team was helpful!)

Tips for ordering a print
Avoid the rookie mistakes

  1. Select a size for your model: The price of the print is directly related to the cost the print. Simple vulva and penis models with the longest axis being about 10cm long make for a nice model to hold and examine. Be careful with the size -- scaling models up get expensive fast.
  2. Select PLA as the material: PLA is perfect for these models and the cheapest option. Of course you can choose any other material you like -- even gold is an option.
  3. Select the default 20% infill: The infill determines how much material is inside an otherwise hollow print; 20% is more than enough to make a strong print.
  4. Select a color of your choice and then finish the process to purchase your print.

If you would like to share a link to this model, we encourage you to save this model image to your computer/device and then go to the site where you wish to post the link and upload the image from your device.

On a mobile device, long press on the image and then select the option to save the image. On a computer, right click on the and select to save the image to your computer.

The link to this page:

The link to this screenshot:

more models from the same person and more full body models